AB POWER SYSTEM SOLUTION
Featured Products
Highest quality standards are achieved through the implementations of latest technology, decades of experience and everlasting moral values , which have helped us to retain our customers as well as multiply them.
Welcome to AB POWER SYSTEM SOLUTION
Tuned Filter
Product Details:
Size as per customer requirements
Material copper or aluminium , type of core CRGO,
Usage Harmonic filteration , Real time filteration & Compensation.
Detuned Harmonic Filter: Detuned filter are used, in supply networks having a high level of harmonic distortion, when the final objective is reactive power compensation at the fundamental frequency. Their purpose is to avoid the harmonic currents overload to the capacitors by diverting them to the mains. Protection filters are made by connecting reactors in series with capacitors, in such a way that the tuning frequency of the whole unit is set at a value between the fundamental frequency and the frequency of the lowest present harmonics, which is usually the 5th order harmonic. In this the filter has a high inductive impedance for all the harmonic frequencies.
MOQ 5 kvar
INA/INR reactors are designed to work in supply systems with a high level of harmonic distortion in such a way that they allow a safe and reliable service of the power factor detuned, so that, the whole unit has an inductive are specially designed to work in series with FMF capacitors correction equipments. Reactors are connected in series with power capacitors, forming a resonant circuit conveniently.Connection of a reactor in series with a power capacitor, makes the capacitor to work at a voltage higher than the supply voltage. Because of this, capacitors need to be connected to protection reactors and need to be designed to work at higher voltages than standard capacitors. The choice of the tuning point of the filters is to balance between the quantity of harmonics rejected by the filter and the voltage increase produced in the capacitor at the fundamental frequency.It is to be also kept in mind that reactive power supplied by the filter at rated frequency (50 or 60 Hz), is different to the one that the capacitor would supply without the reactor. Taking all the above into account, the reactor is normally chosen in such a way that its impedance is about 7% of the impedance of the capacitor that protects. This will give a tuning frequency, for example at 50 Hz, of 189 Hz. Other tuning frequencies are also available.
Third Harmonic Filter
Product Details:
Size as per customer requirements
Usage Harmonic filtering, power factor correction, real filtering and compensations.
Third Harmonic Filter is basically passive filters with a parallel combination of inductance and condenser. The advantages of third harmonic filter are:
Reduction of the third overtone until a 90%.
Significant Reduction of other overtones.
Reduction current of neutral absorbed.
Reduction of losses in the installation.
Reduction of the interferences.
Improvement of the power factor.
Filter HBF-T has to be selected in agreement with the current of the breaker that protects the circuit. They are connected in the neutral conductor of the three-phase installation, and it is possible to be seen in scheme 1.
MOQ 25 kvar
High Pass Filter
In installations with High Pass Filter generation loads, the current through the neutral cable can be higher than the one in the phases, even in case of balanced loads. The most proper solution for these problems is to use a specific equipment for the 3rd harmonic filtering, consisting basically in a three-phase isolating transformer, delta-star connected, that filters the 3rd harmonic current, plus a passive filter which reduces the 5th harmonic.
Features:
High Pass Filter
Longer service life
High performance
Additional Information:
Minimum Order Quantity: 50 kvar
Passive Harmonic Filter
Product Details:
Size as per customer requrement
Material As per customer required
Usage to improve the power factor
Passive Harmonic Filter are used on distribution networks which have a high THD (Total harmonic distortion), when the final target is to compensate the power factor at the fundamental frequency.Its purpose is to avoid overloads due to harmonic currents in the capacitor, deflecting them to the network.Protection filters are made with serial reactors and capacitors. The tuned frequency of each unit is adjusted between the fundamental and the lower harmonic present in the net, which usually is the 5 th order.In this way, the filters present high inductive impedance for all the harmonic frequencies.
Features:
High performance
Excellent finishing
Highly reliable
MOQ 100 kvar
Detuned Harmonic Filter
Product Details:
Voltage 380 V
Size as per customer requirements
Material Copprt wire and MS
Usage Installed in electrical circuits for improving the power factor for maintaining a steady flow of cur
We are among the leading names in the industry for supplying Detuned Harmonic Filter. The offered filter is exceptional in terms of quality as made in sync with the industrial standards and the prevalent market trends. It is installed in electrical circuits for improving the power factor for maintaining a steady flow of current through circuits. This component can be supplied in bulk owing to our spacious warehousing.
Features:
High performance
High Pass Filter
Longer service life
MOQ 5 kvar
Lt Detuned Harmonic Filters
Product Details:
Size as per customer requirement
Material CRGO , Aluminium & Copper winding
We have gathered huge recognizance by manufacturing and supplying highly demanded LT Detuned Harmonic Filters. Specially designed to suppress the levels of harmonic current, our offered LT detuned- filters are best suited for commercial buildings and hospitals. Further, our offered filters are equipped with highest quality components that lower the harmonic current distortion and increase the system efficiency at a competitive cost.
Features:
Space saving design
User friendly operation
Maintenance free life
MOQ 5 kvar
Harmonic Filters
Product Details:
Size as per load of end user
Usage to improve real power factor , harmonics filterations , increase the Voltage at load centre
Harmonic Filters are used to Mitigate the Harmonic Levels.We are instrumental in wholesaling and supplying a wide range of Harmonic Filters. These filters are most suitable for those networks, which are highly prone to excessive harmonics. The Active Harmonic Filters offered by us guarantee highly effective compensation even in the presence of highly asymmetrical loads.
Features:
Excellent finishing
High performance
High Pass Filter
MOQ 50 kvar
Our Vision
* To embrace new technologies and methods. * To give unsurpassed products and services to the clients. * To constantly look for improvement and changes.
